Oct 29 – 31, 2026
Essaouira, Morocco
Africa/Casablanca timezone

Performance analysis of a photovoltaic–thermal (PVT) collector incorporating a nano-enhanced phase change material (Nano-PCM)

Not scheduled
20m
Municipal Library of Essaouira (Essaouira, Morocco)

Municipal Library of Essaouira

Essaouira, Morocco

Av. Lalla Aicha, Essaouira

Speaker

Mr Othmane TAZMAITE (Cadi Ayyad University, UCA, Higher School of Technology, LIREMET, Essaouira, Morocco)

Description

Abstract
The electrical performance of photovoltaic (PV) modules is significantly affected by the increase in operating temperature, making thermal management a key challenge for improving their overall efficiency. Photovoltaic/thermal (PVT) systems provide simultaneous electrical and thermal energy generation while cooling the PV module, as demonstrated by Kim et al. [1]. Furthermore, previous studies have shown that water-cooled PVT collectors can effectively enhance both electrical and thermal performance through improved heat extraction [2–3]. More recently, the use of nanofluids has emerged as a promising approach for further improving heat transfer and overall system efficiency (Sardarabadi et al. [4]; Ghadiri et al. [5]). Building upon these developments, this study presents a three-way comparative numerical investigation of a conventional PV module, a water-cooled PVT system, and a hybrid PVT collector integrating a nanoparticle-enhanced phase change material (nano-PCM). A dynamic thermal model based on energy balance equations was developed and implemented in MATLAB/Simulink to evaluate the thermal regulation and energy performance of the three configurations under a constant solar irradiance of 800 W/m². The results indicate that the hybrid PVT/nano-PCM system provides the best thermal regulation, reducing the PV operating temperature from 84°C to 49°C, compared with 52°C for the water-cooled PVT system. Consequently, the electrical efficiency increases to 7.5%, compared with 5.6% for the conventional PV module and 6.1% for the water-cooled PVT collector, while achieving a thermal efficiency of 65.51%. The numerical predictions are in good agreement with published experimental results, confirming the validity of the proposed model. These findings demonstrate that the integration of nano-PCM represents a promising strategy for maximizing the combined electrical and thermal performance of next-generation PVT systems.

Keywords: Photovoltaic/Thermal system, Nano-enhanced phase change material, Numerical simulation, Technology comparison, Energy efficiency.

References
[1] Kim SM, Kim JH, Kim JT, Experimental study on the thermal and electrical characteristics of an Air-Based photovoltaic thermal collector, Energies, vol. 14, 2661, 2019, https://doi.org/10.3390/en12142661.
[2] Razali NFM, Fudholi A, Ruslan MH, Sopian K, Experiment study of water based photovoltaic-thermal (PV/T) collector, International Journal of Electrical and Computer Engineering (IJECE), vol. 9, pp. 118-125, 2019, http://doi.org/10.11591/ijece.v9i1.pp118-125.
[3] Rostami S, Ibrahim A, Ishak AA, Fazlizan A, Fudholi A, Sopian K, Deghani-Sanij A, Shahsavar A, Al-Aribe KM, Experimental and numerical assessment of water-based photovoltaic/thermal collectors with varied tubular absorber cross-sections, Case Studies in Thermal Engineering, vol. 65, 105665, 2025, https://doi.org/10.1016/j.csite.2024.105665.
[4] Sardarabadi M, Passandideh-Fard M, Heris SZ, Experimental investigation of the effects of silica/water nanofluid on PV/T (photovoltaic thermal units), Energy, vol. 66, pp. 264-272, 2014, https://doi.org/10.1016/j.energy.2014.01.102.
[5] Ghadiri, Sardarabadi M, Pasandideh-fard M, Moghadam AJ, Experimental investigation of a PVT system performance using nano ferrofluids, Energy Conversion and Management, vol. 103, pp. 468-476, 2015, https://doi.org/10.1016/j.enconman.2015.06.077.

Author

Mr Othmane TAZMAITE (Cadi Ayyad University, UCA, Higher School of Technology, LIREMET, Essaouira, Morocco)

Co-authors

Mohammed ER-RAKI (Cadi Ayyad University, UCA, Higher School of Technology, LIREMET, Essaouira, Morocco) Prof. Abderrahim BAZGAOU (Laboratoire Interdisciplinaire de Recherche en Environnement, Management, Energie et Tourisme (LIREMET), École Supérieure de Technologie Essaouira (ESTE) – Université Cadi Ayyad (UCA)) Safae HASNAOUI Prof. Mohammed HASNAOUI (Cadi Ayyad University, UCA, Faculty of Sciences Semlalia, LMFE, Marrakech, Morocco)

Presentation materials